Cockpit table varnishing

Mr. JP spraying varnish on a cockpit table in
the painting cabin.

SOBA washing machine

Installation of a washing machine in a Swan 60 galley.
Available locker was very tight and machine had to be installed on
slides so the buttons would be reachable.

Teak deck sanding

The carpernters finishing the teak deck sanding on
Swan 53 MERI BALLETTI

Pullman Berth

A new pullman berth has been manufactured and installed by our carpenters
on Swan 60-025 SEAWOLF 3

B&G electronics installation

B&G electronics replacement installation in progress
after lightening strike on Baltic 78 LAETITIA

B&G Zeus 12'

Modification of chart table shelves to fit a B&G Zeus 12'
(before dying and varnishing the board)

GRIMLO V blue lines

Mr. JP brushing the second coat of  blue paint on the lines...
Please do not disturb the artist at work  :-)

Teak Deck

Jeremy glueing hatches teak frames

Michel sanding

Teak Deck

Lamination work to fit new Lewmar flush hatches

Laying teak deck

From the teak tree log to the deck

Sylvain adjusting teak slats

53-519 MUSIC

Jeremy adjusting a locker door

Laurent and Wesley reinstalling a door

Teak deck laying

Michel applying primer before glueing

 

59-019 Deck sanding

Sanding and evening the deck to prepare for teak laying

Teak deck Hardware removal

Removing and reinstalling the deck hardware is probably
as time consuming than laying the teak deck itself.
Especially on some boats of that generation when the decks were
covered with winches, blocks, pad-eyes, clutches etc..
This is as well a good opportunity to renew some of the deck
equipment as winches or hatches.

A new teak deck for Swan 59 GRIMLO V

Tenting the boat in case it rains.Steel fittings bolted onto toerail have been
 fabricated to hold the PVC frame work and leave a bit more space inside.
Soon it will be hot in there though.